Soon to complete its first full-scale module in Morocco, Concentrated Solar Power developer 247Solar predicts series build gains could reduce capex to $3,000/kWe and sees advantages for industrial energy supply.
Modular CSP arrays bring economies of series and siting benefits. (Image credit: 247Solar. Rendered image)
Last month, 247Solar announced it will build its first fully-operational demonstration Brayton cycle CSP plant module at the Ouarzazate solar park in central Morocco.
Due online in the first half of 2020, the plant will have a capacity of 400kW and 10 to 13 hours of thermal energy storage.
Supported by the Moroccan Agency for Sustainable Energy (MASEN), the project marks a significant step towards commercial deployment of 247Solar’s modular plant technology.
The plant will allow 247Solar to prove the performance of a fully-integrated system and produce operational data that will boost investor confidence in the technology, Bruce Anderson, CEO of 247Solar, told New Energy Update.
The 247Solar design features multiple high-temperature and modular build advantages and the company is targeting a CAPEX of $5,900/kWe for the first 10 MW commercial system.
247Solar plans to increase the module size 400kWe to 5MW «within the next few years» and 1 GW of deployment could lower the CAPEX to $3,000/kWe, Anderson said.
«Especially when we have our components mass produced in India and South-East Asia,» he said.
Global levelized costs for solar, wind in 2010-2022
Source: IRENA’s ‘Renewable power generation costs in 2018’ report (May 2019).
Several groups are developing modular CSP designs, looking to maximize factory efficiencies and lower construction risks. Australian developer Vast Solar recently announced plans to build a 50 MW CSP-PV plant in New South Wales and predicts its design will be competitive with coal and gas plants.
The smaller plant size of modular designs opens up new siting opportunities including industrial power and heat applications, Anderson told New Energy Update.
“The biggest win for CSP with smaller, modular sizes is a much larger market size due to the ability to build distributed projects near their point of use, near the offtaker,” he said.
Initially, commercial 247Solar plants would consist of modular arrays of 400kW CSP tower plants, each providing power through a small gas turbine. The height of the receivers would be 35 meters, far shorter than conventional CSP tower designs.
The receivers heat ambient pressure air to a temperature of 925 to 1000°C, which is used to drive the turbines. Current CSP tower plants use molten salt as the heat transfer medium (HTM) and storage media, which limits HTM temperatures to 565°C to avoid corrosion and decomposition.
Higher temperatures increase the efficiency of converting heat to electricity and thermal storage and a number of high temperature systems are being developed. In the U.S., Brayton Energy, the National Renewable Energy Laboratory (NREL) and Sandia Laboratories are competing for a $25 million grant from the Department of Energy to build a CSP system capable of temperatures over 700° C. Elsewhere, a new high-temperature ceramic particle CSP receiver developed by Germany’s DLR aims to reach particle temperatures of over 1000° C and will soon be tested in the U.S.
High-temperature systems raise materials challenges and the 247solar design will require ceramic protection in the receiver and insulation of the ducting pathway to the turbine. The properties of air also mean it occupies more volume than conventional HTMs, requiring large ducts and power-hungry blowers.
However, the use of air as HTM has significant benefits, Anderson said.
“Air is a free HTM, the technology does not need heat exchangers and the utilization of gas turbines over steam turbines means that water requirements are restricted to heliostat cleaning, not power generation,» he said.
Water consumption is a challenge for CSP developers, particularly in the Middle East, a key growth area for CSP. Dust and humidity in the region raises reflector soiling challenges while poor water availability hikes water supply costs.
According to Anderson, the 247Solar system can reduce water consumption by around 95% compared with some conventional CSP plants.
In addition, the design will use dry storage mediums- ceramic pellets or firebrick- and these are estimated to cost less than the state-of-the-art molten salt materials used in the latest CSP plants, he said.
The small size of the 247Solar modules would allow mass production of smaller size components and faster on-site assembly, Anderson said.
The absence of heliostat foundations and cabling further accelerates construction, he said.
Modularization means project owners can start to earn revenue after commissioning the first module, while others are being built. In addition, construction teams can be redeployed at the site in series.
Vast Solar’s towers are also smaller than conventional CSP designs and use a lightweight steel lattice structure. The towers are assembled on the ground, then tilted into position.
The modular tower and array layout can be constructed in parallel, at the same time as power block or storage construction, reducing total construction time to between 18 and 24 months, Craig Wood, CEO of Vast Solar, told New Energy Update earlier this year.
The small gas turbines used in the 247Solar design are as efficient as conventional CSP steam turbine systems and provide fast response to fluctuating demand, grid voltage and frequency, Anderson said.
Startup to full power can be achieved in less than five minutes and the unit can operate at efficiencies down to 50%, he said.
The modular arrays mean that individual turbine failure has minimal impact on overall production and the design includes fewer moving parts than conventional CSP plants, which significantly reduces operations and maintenance (O&M) costs, Anderson said.
«We expect O&M costs to be just 40 to 60% of conventional CSP plants,» he said.
The smaller size of modular CSP plants allow efficient land use and opens up siting opportunities on lower-cost hilly and irregular-shaped land.
The shorter tower height also avoids environmental or airspace challenges faced by much taller designs.
Importantly, the technology could be sited close to distributed energy customers, particularly industrial power and heat consumers.
A number of CSP developers are specialising in combined heat and power plant configurations to tap the growing demand for industrial heat from renewable sources. Industrial heat makes up two-thirds of industrial energy demand and is responsible for most of the sectors’ CO2 emissions.
Global industrial heat demand by temperature level
Industrial segments which can be served by CSP-centred heating systems include chemicals, plastics, food and beverage, machinery, mining, paper manufacturing, textiles and metal surface treatment.
For industrial CSP-CSH customers, a 1 MWe 247Solar system can provide 1.5MWth energy and applications could include water purification, absorption chilling and crop drying, Anderson said.
By Kerry Chamberlain, newenergyupdate.com/csp-today